18:54 GMT+7
Posted by ngotunghp . Folder: ApplicationsMP3 To Ringtone Gold is an ringtone converter. It can be used to convert the popular compressed audio formats (.mp3,.wma,.wav,.ogg) to ringtone format(.mmf,.amr,.mp3,.wav, .qcp) and send them to your cell phone.
It can be used to rip multiple audio CDs at once .It also can be used as a mp3 resizer for your mp3 mobile phone.You can save any part of your favorite mp3s to ringtone format.
64MB mp3 mobile phone can support more than 60 songs. Simply drag and drop the songs you want onto the main screen.
"MP3 To Ringtone Gold là phần mềm chuyển đổi nhạc chuông. Ứng dụng có thể chuyển đổi các định dạng âm thanh nén phổ biến (.mp3,.wma,.wav,.ogg) sang định dạng nhạc chuông (.mmf,.amr,.mp3,.wav, .qcp) và chuyển sang điện thoại di động của bạn.
Phần mềm có thể trích nhạc từ hàng loạt các CD nhạc cùng lúc. Ngoài ra nó còn có thể thay đổi dung lượng tập tin mp3 cho điện thoại. Bạn có thể lưu các bản nhạc mp3 yêu thích với định dạng nhạc chuông."
Features
1. Convert mp3 to mmf
2. Convert mp3 to amr
3. Converrt mp3 to wav
4. Convert mp3 to qcp
5. Convert CD to mmf
6. Convert CD to amr
7. Convert CD to mp3/wav
8. Send ringtones
Download I.n.s.t.a.l.l (Dead Link? Notify Now):
http://rapidshare.com/files/159508510/MP3ToRingtoneGold7.27_ntpro.tk.rar18:20 GMT+7
Posted by ngotunghp . Folder: ApplicationsThe distinguishing features of Internet Download Accelerator are superior overall performance and convenient user interface.
Internet Download Accelerator lets you to noticeably increase the speed of file download from the Internet using HTTP, HTTPS and FTP protocols. The acceleration is achieved by splitting a file being downloaded into several parts and downloading these parts at the same time. Internet Download Accelerator resumes broken downloads from where they left off from both HTTP, HTTPS and FTP servers.
Whatever your connection type, Internet Download Accelerator will use the bandwidth of your connection most effectively and download files extremely fast.
Power and useful tool for management of download categories. Possibility of automatic file type detection with automatic file placement to the specified categories. Unlimited number of categories and hierarchy levels.
The program also contains:
- FTP Explorer;
- site manager for password and download folders management;
- scheduler;
- download speed control, automatic mode for the most comfortable browsing on the Web;
- dial for dial-up connection;
- search for files, programs, games, and music;
- IDA Bar - a toolbar for Internet Explorer.
Download I.n.s.t.a.l.l (Dead Link? Notify Now):
http://rapidshare.com/files/159318862/IDAv5.6.1.1133_ntpro.tk.rar08:20 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials
Những mẹo nhỏ từ đơn giản đến phức tạp nhưng phù hợp với "cấp độ" tin văn phòng của bạn nếu bạn muốn trưng dụng lại những bức ảnh tuyệt đẹp đã bị "đóng vào" trang văn bản MS Word.
Cách 1: Bạn hãy mở file văn bản lên và bây giờ muốn lấy bất cứ một hình nào đó thì hãy click chuột phải vào hình đó chọn copy sau đó mở phần mềm Photoshop ra và nhấn tổ hợp phím Ctrl+V, tiếp theo truy cập vào File và chọn Save as để lưu hình đó lại. Tuy nhiên chất lượng ảnh lưu lại có vẻ không tốt cho lắm.
Cách 2: Áp dụng với máy tính đã cài sẵn trình duyệt Firefox. Cũng tại giao diện cửa sổ văn bản Word, bạn hãy vào File chọn Web Page Preview lập tức trình duyệt sẽ mở file văn bản chứa các hình ảnh đó dưới dạng thức trang web. Từ đó, bạn chỉ cần thực hiện thao tác click chuột phải vào hình bất kỳ, ngay lập tức menu ngữ cảnh xổ ra để bạn chọn tiếp Save Images As và chỉ định thư mục cần lưu lại file ảnh, rồi bấm nút Save để hoàn tất quy trình trích xuất ảnh.
Cách 3: Phương thức này rất đơn giản để tách riêng ra tất cả các ảnh từ một văn bản Word. Bạn sử dụng chương trình Word mở file muốn tách ảnh ra. Vào trình đơn File, chọn Save As... Trong hộp thoại hiện ra, ở phần Save as type... chọn một trong hai lựa chọn Web page (*.htm; *.html) hoặc Web page, Filtered (*.htm; *.html). Tiếp theo định vị folder lưu file khi chuyển sang định dạng website. Sau khi chọn Save, bạn sẽ thấy xuất hiện một file html và một thư mục trong đó chứa toàn bộ các ảnh trích xuất ra từ file văn bản trước đó. Hai kiểu lưu chỉ khác nhau ở một file filelist.xml xuất hiện cùng trong thư mục chứa ảnh khi lưu dạng Web page (không có Filter).
Cách 4: Khá hoàn hảo và có thể trích xuất tất cả các hình ảnh trong file văn bản một cách nhanh nhất trên hệ thống đã cài Microsoft FrontPage. Từ giao diện My Computer, bạn hãy click chuột phải vào văn bản muốn trích xuất ảnh, rồi chọn Open With. Trong hộp thoại Choose Program chọn Microsoft FrontPage, chọn Yes ở hộp thoại hiện ra để FrontPage export code giống như bạn đang thiết kế website. Tiếp theo tại cửa sổ soạn thảo FrontPage bạn vào File chọn Save as để lưu file vào một thư mục nào đó trong máy rồi nhấn OK để lưu lại toàn bộ hình ảnh. Muốn xem lại các hình ảnh bạn cần, thì chỉ cần mở thư mục vừa lưu file là có thể thấy.
Sau đó, bạn hoàn toàn có thể upload tất cả những hình ảnh lên blog hay gửi email cho bạn bè người thân cũng như tái sử dụng cho các ứng dụng khác.
Cách 1: Bạn hãy mở file văn bản lên và bây giờ muốn lấy bất cứ một hình nào đó thì hãy click chuột phải vào hình đó chọn copy sau đó mở phần mềm Photoshop ra và nhấn tổ hợp phím Ctrl+V, tiếp theo truy cập vào File và chọn Save as để lưu hình đó lại. Tuy nhiên chất lượng ảnh lưu lại có vẻ không tốt cho lắm.
Cách 2: Áp dụng với máy tính đã cài sẵn trình duyệt Firefox. Cũng tại giao diện cửa sổ văn bản Word, bạn hãy vào File chọn Web Page Preview lập tức trình duyệt sẽ mở file văn bản chứa các hình ảnh đó dưới dạng thức trang web. Từ đó, bạn chỉ cần thực hiện thao tác click chuột phải vào hình bất kỳ, ngay lập tức menu ngữ cảnh xổ ra để bạn chọn tiếp Save Images As và chỉ định thư mục cần lưu lại file ảnh, rồi bấm nút Save để hoàn tất quy trình trích xuất ảnh.
Cách 3: Phương thức này rất đơn giản để tách riêng ra tất cả các ảnh từ một văn bản Word. Bạn sử dụng chương trình Word mở file muốn tách ảnh ra. Vào trình đơn File, chọn Save As... Trong hộp thoại hiện ra, ở phần Save as type... chọn một trong hai lựa chọn Web page (*.htm; *.html) hoặc Web page, Filtered (*.htm; *.html). Tiếp theo định vị folder lưu file khi chuyển sang định dạng website. Sau khi chọn Save, bạn sẽ thấy xuất hiện một file html và một thư mục trong đó chứa toàn bộ các ảnh trích xuất ra từ file văn bản trước đó. Hai kiểu lưu chỉ khác nhau ở một file filelist.xml xuất hiện cùng trong thư mục chứa ảnh khi lưu dạng Web page (không có Filter).
Cách 4: Khá hoàn hảo và có thể trích xuất tất cả các hình ảnh trong file văn bản một cách nhanh nhất trên hệ thống đã cài Microsoft FrontPage. Từ giao diện My Computer, bạn hãy click chuột phải vào văn bản muốn trích xuất ảnh, rồi chọn Open With. Trong hộp thoại Choose Program chọn Microsoft FrontPage, chọn Yes ở hộp thoại hiện ra để FrontPage export code giống như bạn đang thiết kế website. Tiếp theo tại cửa sổ soạn thảo FrontPage bạn vào File chọn Save as để lưu file vào một thư mục nào đó trong máy rồi nhấn OK để lưu lại toàn bộ hình ảnh. Muốn xem lại các hình ảnh bạn cần, thì chỉ cần mở thư mục vừa lưu file là có thể thấy.
Sau đó, bạn hoàn toàn có thể upload tất cả những hình ảnh lên blog hay gửi email cho bạn bè người thân cũng như tái sử dụng cho các ứng dụng khác.
Theo Vũ Anh Tú - VTC
22:51 GMT+7
Posted by ngotunghp . Folder: Ebooks TutorialsBạn có thể sử dụng MS Word để nén file ảnh (làm giảm dung lượng của file ảnh).
Tôi đã thực hiện nén một file ảnh có dung lượng 1,3MB bằng Word 2003 và thu được file ảnh có dung lượng chỉ có 26,2KB.
Sau khi mở Word, bạn bấm chuột vào menu Insert > Picture > From file… xuất hiện hộp thoại Insert Picture, bạn chọn tới file ảnh cần nén (file có dung lượng lớn), xong bấm nút Insert hoặc gõ phím Enter.
Tiếp theo bạn vào File > Save As… bấm vào nút Desktop để chọn nơi lưu file ảnh mới là Desktop (để mở lên cho nhanh). Bạn đặt tên tập tin ở ô File name. Ở ô Save as type bạn chọn Web Page. Sau đó bấm nút Save. Đóng Word lại.
Trở ra màn hình nền, sẽ thấy xuất hiện một thư mục mới có cùng tên với tập tin bạn vừa lưu. Bấm đôi vào thư mục này bạn sẽ thấy có ba file. File có tên là image002.jpg là file đã được nén. Sau cùng bạn xóa file có tên là filelist.xml và image001.jpg đi là xong.
01:08 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials
Autodesk 3DS Max 8: e-Learning course (DVD)
10 Chapters, Source Files included | 2,15 Gb | DVD-Rip
Video Hướng dẫn sử dụng Autodesk 3DS Max 8
Content:
Chapter 01 - Editable Poly Modeling
Chapter 02 - Using the Unwrap UVW Modifier
Chapter 03 - Material Improvements
Chapter 04 - Hair
Chapter 05 - Cloth
Chapter 06 - Biped
Chapter 07 - Character Animation with Bones
Chapter 08 - Animation Controllers
Chapter 09 - Skinning
Chapter 10 - Rendering
Chapter 11 - Project Management
http://rapidshare.com/files/159029166/g-max8l.r00
http://rapidshare.com/files/159034252/g-max8l.r01
http://rapidshare.com/files/159040072/g-max8l.r02
http://rapidshare.com/files/159044779/g-max8l.r03
http://rapidshare.com/files/159054217/g-max8l.r04
http://rapidshare.com/files/159061357/g-max8l.r05
http://rapidshare.com/files/159067247/g-max8l.r06
http://rapidshare.com/files/159075342/g-max8l.r07
http://rapidshare.com/files/159083442/g-max8l.r08
http://rapidshare.com/files/159094730/g-max8l.r09
http://rapidshare.com/files/159102860/g-max8l.r10
http://rapidshare.com/files/159112715/g-max8l.r11
http://rapidshare.com/files/159119862/g-max8l.r12
http://rapidshare.com/files/159126450/g-max8l.r13
http://rapidshare.com/files/159131965/g-max8l.r14
http://rapidshare.com/files/159138456/g-max8l.r15
http://rapidshare.com/files/159145349/g-max8l.r16
http://rapidshare.com/files/159151340/g-max8l.r17
http://rapidshare.com/files/159156784/g-max8l.r18
http://rapidshare.com/files/159161709/g-max8l.r19
http://rapidshare.com/files/159167443/g-max8l.r20
http://rapidshare.com/files/159173260/g-max8l.r21
http://rapidshare.com/files/159179030/g-max8l.r22
http://rapidshare.com/files/159182178/g-max8l.r23
http://rapidshare.com/files/159185359/g-max8l.r24
http://rapidshare.com/files/159188373/g-max8l.r25
http://rapidshare.com/files/159191209/g-max8l.r26
http://rapidshare.com/files/159193998/g-max8l.r27
http://rapidshare.com/files/159196808/g-max8l.r28
http://rapidshare.com/files/159199545/g-max8l.r29
http://rapidshare.com/files/159204461/g-max8l.r30
http://rapidshare.com/files/159206938/g-max8l.r31
http://rapidshare.com/files/159209214/g-max8l.r32
http://rapidshare.com/files/159211544/g-max8l.r33
http://rapidshare.com/files/159213851/g-max8l.r34
http://rapidshare.com/files/159216024/g-max8l.r35
http://rapidshare.com/files/159218110/g-max8l.r36
http://rapidshare.com/files/159220236/g-max8l.r37
http://rapidshare.com/files/159011778/g-max8l.r38
http://rapidshare.com/files/159016121/g-max8l.r39
http://rapidshare.com/files/159020628/g-max8l.r40
http://rapidshare.com/files/159024780/g-max8l.r41
10 Chapters, Source Files included | 2,15 Gb | DVD-Rip
Video Hướng dẫn sử dụng Autodesk 3DS Max 8
Content:
Chapter 01 - Editable Poly Modeling
Chapter 02 - Using the Unwrap UVW Modifier
Chapter 03 - Material Improvements
Chapter 04 - Hair
Chapter 05 - Cloth
Chapter 06 - Biped
Chapter 07 - Character Animation with Bones
Chapter 08 - Animation Controllers
Chapter 09 - Skinning
Chapter 10 - Rendering
Chapter 11 - Project Management
Download I.n.s.t.a.l.l (Dead Link? Notify Now):
http://rapidshare.com/files/159202105/g-max8l.rarhttp://rapidshare.com/files/159029166/g-max8l.r00
http://rapidshare.com/files/159034252/g-max8l.r01
http://rapidshare.com/files/159040072/g-max8l.r02
http://rapidshare.com/files/159044779/g-max8l.r03
http://rapidshare.com/files/159054217/g-max8l.r04
http://rapidshare.com/files/159061357/g-max8l.r05
http://rapidshare.com/files/159067247/g-max8l.r06
http://rapidshare.com/files/159075342/g-max8l.r07
http://rapidshare.com/files/159083442/g-max8l.r08
http://rapidshare.com/files/159094730/g-max8l.r09
http://rapidshare.com/files/159102860/g-max8l.r10
http://rapidshare.com/files/159112715/g-max8l.r11
http://rapidshare.com/files/159119862/g-max8l.r12
http://rapidshare.com/files/159126450/g-max8l.r13
http://rapidshare.com/files/159131965/g-max8l.r14
http://rapidshare.com/files/159138456/g-max8l.r15
http://rapidshare.com/files/159145349/g-max8l.r16
http://rapidshare.com/files/159151340/g-max8l.r17
http://rapidshare.com/files/159156784/g-max8l.r18
http://rapidshare.com/files/159161709/g-max8l.r19
http://rapidshare.com/files/159167443/g-max8l.r20
http://rapidshare.com/files/159173260/g-max8l.r21
http://rapidshare.com/files/159179030/g-max8l.r22
http://rapidshare.com/files/159182178/g-max8l.r23
http://rapidshare.com/files/159185359/g-max8l.r24
http://rapidshare.com/files/159188373/g-max8l.r25
http://rapidshare.com/files/159191209/g-max8l.r26
http://rapidshare.com/files/159193998/g-max8l.r27
http://rapidshare.com/files/159196808/g-max8l.r28
http://rapidshare.com/files/159199545/g-max8l.r29
http://rapidshare.com/files/159204461/g-max8l.r30
http://rapidshare.com/files/159206938/g-max8l.r31
http://rapidshare.com/files/159209214/g-max8l.r32
http://rapidshare.com/files/159211544/g-max8l.r33
http://rapidshare.com/files/159213851/g-max8l.r34
http://rapidshare.com/files/159216024/g-max8l.r35
http://rapidshare.com/files/159218110/g-max8l.r36
http://rapidshare.com/files/159220236/g-max8l.r37
http://rapidshare.com/files/159011778/g-max8l.r38
http://rapidshare.com/files/159016121/g-max8l.r39
http://rapidshare.com/files/159020628/g-max8l.r40
http://rapidshare.com/files/159024780/g-max8l.r41
17:59 GMT+7
Posted by ngotunghp . Folder: PDA Mobile PhonesDownload SymbiamWarez (Dead Link? Notify Now):
http://rapidshare.com/files/159298749/symbianware28102008_ntpro.tk.rar17:52 GMT+7
Posted by ngotunghp . Folder: ApplicationsDownload WinWarez (Dead Link? Notify Now):
http://rapidshare.com/files/159318409/winware28102008_ntpro.tk.rar.001http://rapidshare.com/files/159308562/winware28102008_ntpro.tk.rar.002
http://rapidshare.com/files/159310369/winware28102008_ntpro.tk.rar.003
17:00 GMT+7
Posted by ngotunghp . Folder: PDA Mobile PhonesDownload PPCWarez (Dead Link? Notify Now):
http://rapidshare.com/files/159297078/ppcware28102008_ntpro.tk.rar18:26 GMT+7
Posted by ngotunghp . Folder: ApplicationsMP3 To Ringtone Gold is an ringtone converter. It can be used to convert the popular compressed audio formats (.mp3,.wma,.wav,.ogg) to ringtone format(.mmf,.amr,.mp3,.wav, .qcp) and send them to your cell phone.
It can be used to rip multiple audio CDs at once .It also can be used as a mp3 resizer for your mp3 mobile phone.You can save any part of your favorite mp3s to ringtone format.
64MB mp3 mobile phone can support more than 60 songs. Simply drag and drop the songs you want onto the main screen.
Features
1. Convert mp3 to mmf
2. Convert mp3 to amr
3. Converrt mp3 to wav
4. Convert mp3 to qcp
5. Convert CD to mmf
6. Convert CD to amr
7. Convert CD to mp3/wav
8. Send ringtones
Download I.n.s.t.a.l.l (Dead Link? Notify Now):
http://rapidshare.com/files/159274771/PortableMP3ToRingtoneGold5.23_ntpro.tk.rar02:17 GMT+7
Posted by ngotunghp . Folder: News RelaxBài văn được viết trên giấy thi của trường Marie Curie.
Trong mấy ngày gần đây, cộng đồng mạng lại xôn xao khi chứng kiến một số bài văn "bất hủ" khác của một bạn học sinh trường Marie Curie
Đề bài: Sau khi chết ở giếng Loa Thành, trong 1 lần lạc xuống thủy cung. Trọng Thuỷ đã tìm gặp lại Mị Châu. Hãy tưởng tượng và kể lại câu chuyện đó.
Bài làm:
10G5 –Entertainment trân trọng giới thiệu truyện ngắn: “Mị Châu –Trọng Thuỷ phần 2” qua giọng kể của các nghệ sĩ:
- Nấm baby
- Ngọc lazzy
- Hà xynk
- Tươi silk
- Lynk zenny
- Tú jin
- Quân bò sữa
- My thạk sung
Và câu chuyện của chúng ta bắt đầu……………….
Tối hôm đó, Trọng Thuỷ về nhà, hắn rất buồn vì chiều hôm nay đánh con lô 89 nó lại về con 90 ( OMG-ức chế vkl). Trong con buồn bực , hắn quyết định mở máy, vào Au nhảy cho đỡ nhớ Mị Châu và tiện thể cày tí level. Thật ko may, hôm nay Au lag lòi (T T), hắn đành phải turn off máy và đi tắm. ra đến ao hắn bất chợt thấy 1 bóng người lấp ló gần giếng. hắn lấy hết can đảm lại gần thì nhạ ra đó chính là hình bóng of Mị Châu.( oh men :- ). Cái bóng ấy cất tiếng nói với hắn:
Lại đây, lại đây vs em (- có tí mơi ;;
Trọng Thuỷ lơ ngơ bước tới, ôm chầm lấy cái bong thì nó bất chợt biến mất. Trọng Thuỷ mất thăng bằng, rơi ùm xuống giếng, có vẻ như là chết nghẻo òy. (i-o<>
Bất tỉnh hồi lâu, khi tỉnh lại.hắn thấy xung quanh mình là một làn nước xanh, có những sinh vật dưới nước như “cá, tôm ,mực , rùa….. chấm chấm chấm….” đang bơi nhộn nhịp. thấy có một con mực ất ơ đang lại gần, Trọng Thuỷ liền níu kéo và hỏi:
- “ anh làm ơn cho hỏi, đây là chốn giang hồ nào?”
Con mực bức xúc wa, fun mực vào mặt thằng Trọng Thuỷ ròi mới đáp lại:
“ đồ quỷ sứ, tao là đàn bà fụ nữ hẳn hoi, hang họ đầy đủ, tem chưa bóc, còn zin 100% thế mà mài dám gọi tao= anh àk, bà lại vả cho 1 fát thì hết cả lấc cấc bây h ( )…
Trọng Thuỷ là dân chơi nhà quê nên đâu có them chấp cái loại ất ơ này (), hắn hỏi lại:
- thế chị có thể cho biết đây là đâu ko?”
- đây là thuỷ cung “company”, nơi tụ tập tất cả dân chơi đến đây để lắk và thác loạn…. mời anh theo tôi, tôi sẽ đưa anh tới gặp chủ tịch lắk long vương.
Đi theo con mực vào gần đến nơi, Trọng Thuỷ bị 2 con rùa chặn lại nói:
-đề nghị anh xuất trình chứng minh thư, giấy fép đi lại dưới nước, hộ chiếu ra vào thủy cung và giấy báo tử!” (jổ ôy :o :-s).
Trọng Thuỷ bây h mới có cơ hội thể hiện bản lĩnh của 1 tên dân chơi nhà quê, (;” play dân nq). ...Rút trong túi ra 2 tờ polime 2lít ( 200k vờ nờ đờ VNĐ)
Giúi vào tay mỗi con rùa 1 tờ và nhẹ nhàng nói:
-2 anh thong cảm sang nay em đi vội vã , chết vội vàng nên ko mang theo giấy tờ, mấy anh cầm 1 chút gọi là….:”>
2 con rùa làm bộ:
- chú cứ wan trọng hoá vấn đề, ko có thì bảo 2 anh 1 câu chứ cần zì fải thế nài =.=” . thôi chú vào đi, cần gì cứ pm 2 anh nhớ : x “
Vào gặp được long vương ồy, Trọng Thuỷ được long vương chỉ đường tới chỗ fòng of Mị Châu. Long vương nói:
- ngươi đi tới hành lang bên kia, đam thẳng, xuyên thủng, rẽ lung tung, cứ thế là sẽ tới được room of Mị Châu” ( - ).
- Trọng Thuỷ theo lời chỉ dẫn , đi tới nơi thì bắt gặp một cảnh tượng (cấm trẻ em dưới 14 tuổi đọc những dòng sau đây………..)
-bé kia, thýk ti hí ko, nhắm mắt lại!
Mị Châu và thái tử con zai vua thuỷ tề đang soi cầu lô đề ( đứa nào đọc mấy dòng trên mà nghĩ linh tinh là ứ được đâu đếy nhớ ơ-x; rất là vớ vẩn nhớ ……….).
Mị Châu nói:
-dạo này cầu lô thất thường anh nhở” ( :-s eo ).
Thái tử đáp:
-ừk, đọ nài anh toàn thua, hôm nay quyết tâm thiết kế đẻ fang 1 con, thế nào cũng ăn (oầy :o).
Trọng Thuỷ bước vào, Mị Châu thấy chồng thì liền chạy tới ôm hôn tíu tít (chút chụt chùn choẹt :*:* ). Long thái tử rút lui để 2 vợ chồng tâm sự (_._” ).
2 vợ chồng gặp lại nhau , vui mừng như vừa hack được 100k VCoin (OMG =p? ) liền xin long vương cho đăng ký hộ khẩu thường trú tại thuỷ cung và xin được cấp sổ đỏ. Họ mở 1 cửa hàng Internet quy mô nhỏ và bán kèm các loại thẻ như: VLTK ( võ lâm truyền kỳ), audition, thẻ vinaphone, viêttl và mobìone (^.^). Cửa hang ngày càng fát triển ,2 vợ chồng ko còn fải đụng tay vào việc zì nữa mà để cho ôsin làm. Gần đây, Mị Châu thấy chồng có vẻ lạnh nhạt vs mình nên quyết theo dõi. ( ).
1 ngày nọ , nàng lấy cớ đi đú vs hội bạn , để chồng ở nhà 1 mình. Sau đó đi nấp để rình chồng . quả nhiên, Trọng Thuỷ ở nhà đã pm cho gái đến chơi. (>.
-4h rồi đếy anh nhờ:”> thế anh định như nào :”>?”
Trọng thủy nói:
-tàu nhanh đi em nhớ con mụ vợ anh nó sắp về ồy “
Nàng tiên cá đáp:
- ừk anh yêu nhưng mà hôm nay em ko lấy 50k như mọi khi đc đâu :-s. ngày lễ là anh fải cho em trăm ba mới được (130K vờ nờ đờ VNĐ ).
- Trọng thủy nghĩ:” con nài rất là giẻ rack nhớ >”<. Nhưng vẫn chấp nhận tàu nhanh 4h 130k với nàng tiên cá .
- Thấy Trọng Thuỷ và nàng tiên cá abc xyz . Mị Châu tực giận đùng đùng nhảy vào úp sọt nàng tiên cá, chụp ảnh nàng tiên cá để post lên Dậythì.com.
- Đuổi nàng tiên cá đi ồy, Mị Châu way sang hỏi tội Trọng Thuỷ (>).
- Trọng Thuỷ thấy vợ đang ức chế , lại biết được là vợ mình vốn rất hổ báo cáo chồn, nên hắn rối rít nói:
- - anh xin lỗi, anh biết sai ồy, anh xin lỗi mà ()
- Mị Châu khệnh vãi, đáp lại:
- Xin lỗi mà được á! Xin lỗi mà được à! : x ( ! có là cái zì của tôi ko mà xin lỗi > ) rất là vớ vẩn nhớ. Tôi ko nghe giải thík, anh lướt ngay khỏi nhà tôi đi, bánh té [-x
Trọng Thuỷ đành fải ra đi. Lòng hắn đau khổ nặng nề, vừa đi vừa nói lẩm bẩm:
-vì sao em nỡ nói vs anh 1 câu mai chúng ta ko gặp, vì saoem nỡ đánh thức 1 con tim đang mộng mơ………….. vì sao nước mắt cay đắng còn rơi………. Vì ai, vì ai……………… vì 1 người………..! (=>> Trọng Thuỷ from the rapclub production=>> ).
Kết thúc truyện, Mị Châu trở thành chủ tịch hội đồng wản trị NetViệt. và Trọng Thuỷ may mắn đc fát hiện tài năng rap, trở thành 1 rapper chuyên nghiệp ngang tầm vs LK & Young Uno :)>-
Đừng tưởng 9X làm văn tầm bậy nhé, nghịch lém đây, đúng là thứ ba ...9x
Hãy xem đây:
Đề bài văn kiểm tra 90 phút ngày 3/10/2007: "Sau khi chết ở giếng Loa Thành, xuống thủy cung Trọng Thủy đã tìm gặp lại Mị Châu. Hãy tưởng tượng và kể lại chuyện đó".
Bài văn được Thu viết rất chuyên nghiệp, có phân vai nghiêm chỉnh. Và câu chuyện được bắt đầu với cái cớ "Trọng Thủy về nhà, hắn rất là buồn vì chiều hôm nay đánh con lô 89, nó lại về 90 (OMG-ức chết vkl >''<)". Khi chỉ đường cho Trọng Thụy gặp Mỵ Châu, "Long Vương nói: Ngươi đi tới hành lang kia, đâm thẳng, xuyên thủng, rẽ lung tung, cứ thế là tới được room of Mị Châu".
Trong bài viết, nhiều đoạn rất "sáng tạo": "Hai vợ chồng gặp nhau, vui mừng như vừa hack được 100k Vcoin liền xin Long Vương cho đăng ký hộ khẩu thường trú tại thủy cung & xin được cấp sổ đỏ. Họ mở một cửa hàng internet quy mô nhỏ & bán kèm các loại thẻ như: VLTK (võ lâm truyền kỳ), Audition, thẻ Vinaphone, Mobilephone & Viettel. Cửa hàng ngày càng phát triển, 2 vợ chồng không còn phải đụng tay vào việc gì nữa mà để cho oshin làm".
Các câu văn sử dụng tiếng lóng đang rất phổ biến trong giới trẻ như: "Đồ quỷ sứ, tao là đàn bà phụ nữ hẳn hoi, hàng họ đầy đủ, tem chưa bóc, còn zin 100%, thế mà mài dám gọi tao = anh àk, bà lại vả cho một fát thì hết cả lấc cấc bây h".
Sau khi đã xuống Thủy cung, "đi theo con mực vào gần tới nơi, Trọng Thủy bị 2 con rùa chặn lại nói: Đề nghị anh xuất trình chứng thu, giấy phép đi lại dưới nước, hộ chiếu ra vào thủy cung, giấy báo tử... Trọng Thủy bây giờ mới có cơ hội thể hiện bản lĩnh của một dân chơi nhà quê, rút trong túi ra 2 tờ polymer 2, giúi vào tay mỗi rùa 1 tờ và nhẹ nhàng: Sáng nay em đi vội vàng, chết vội vã nên không kịp mang theo giấy tờ, có chút gọi là, mong 2 anh thông cảm...".
Sáng nay, trao đổi về bài văn này, thầy Nguyễn Xuân Khang, Hiệu trưởng trường Marie Curie, cho biết: "Đến chiều hôm qua, tôi mới nhận được thông tin về bài văn này. Tôi cũng không biết thực hư ra sao, nhưng trường tôi có lớp 10G5. Ngay sau đó tôi đã gọi điện cho cô giáo Nguyễn Phương Nguyên, vừa là cô giáo chủ nhiệm lớp 10G5, vừa là giáo viên dạy môn văn để tìm hiểu rõ hơn. Ngay sau đó, tôi cũng đã nhận được rất nhiều cuộc điện thoại thắc mắc của nhiều người quen cũng như phóng viên.
Cô giáo Nguyên khẳng định với phóng viên Ngôi Sao: "Lớp tôi có học sinh mang tên Bùi Minh Thu. Đề tài về tưởng tượng chuyện Trọng Thủy gặp Mỵ Châu cũng là đề tài có trong sách giáo khoa và tôi lấy ra cho học sinh làm. Đây là bài của em Thu nhưng là bài em ấy làm đùa ngoài giờ học. Những từ bút phê màu đỏ không phải là của tôi.
Ngay sau khi biết về bài văn, tôi có gặp riêng em Thu để hỏi chuyện. Thu thừa nhận chính mình đã viết bài văn đó, nhưng mà viết... chơi thôi. Không nộp cho cô giáo. Viết xong rồi vứt đi luôn, không nhớ nữa. Không ngờ có người lại lấy được, bút phê và đưa lên mạng. Em Thu cũng đã xin lỗi và rút kinh nghiệm không đùa như vậy nữa.
Tuy nhiên, ngay sau khi sự việc xảy ra, tôi đã cùng các thầy, cô và học sinh rút kinh nghiệm toàn trường. Vì bài văn đã dùng giấy kiểm tra trên đó có logo của nhà trường, nên dù ít hay nhiều cũng sẽ gây gây ảnh hưởng không tốt đến uy tín của trường. Nhất là dòng bút phê màu đỏ bắt chước có thể gây lầm tưởng nhà trường có cô giáo thiếu nghiêm túc".
(Theo Ngôisao.nét)
01:59 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials
Nhiều người không thích thú gì với các đoạn quảng cáo của Yahoo! Messenger vì chúng chiếm dụng một phần diện tích đáng kể và làm chậm chương trình. Nếu bạn thích sự thông thoáng, thủ thuật sau sẽ giúp bạn loại bỏ chúng.
Đối với Yahoo Messenger 9
Yahoo! Messenger 9 lấy quảng cáo từ từ tệp tin cache\urls.xml nằm trong thư mục cài đặt. Vì thế muốn vô hiệu hoá các đoạn quảng cáo bạn chỉ cần xoá trắng file này và đặt thuộc tính sao cho chương trình không thể thay đổi được nội dung của nó. Cụ thể, các bước thực hiện như sau:

Bước 1: Tắt hẳn chương trình bằng cách nhắp phải vào biểu tượng của YM trên thanh Task Bar và chọn Exit.
Bước 2: Giả sử thư mục cài đặt của Yahoo Messenger 9 nằm trong ổ đĩa C. Hãy vào C:\Program Files\Yahoo!\Messenger\cache, nhắp chuột phải vào tệp tin file urls.xml chọn Open With, chọn Notepad và sau đó xoá trắng toàn bộ nội dung tệp tin này và đóng lại.
Bước 3: Khoá file urls.xml đã được xoá nội dung. Để làm điều này ổ C cần phải ở định dạng NTFS. Để biết ổ C có ở dạng NTFS hay không bạn hãy nhắp chuột phải vào biểu tượng ổ C trong My Computer và chọn Properties. Ở dòng File System nếu để là NTFS thì có nghĩa ổ C đã ở dạng NTFS. Nếu để là FAT32 thì bạn cần phải thực hiện tiếp bước sau đây.
Bấm tổ hợp phím Windows + R hoặc vào Start chọn Run để mở cửa sổ Command Line. Trong cửa sổ này bạn nhập lệnh convert C: /fs:ntfs để chuyển định dạng ổ C sang NTFS.
Di chuyển vào thư mục cache bằng dòng lệnh cd C:\Program Files\Yahoo!\Messenger\cache, sau đó nhập lệnh cacls urls.xml /D Everyone để khoá tệp tin urls.xml. Chương trình sẽ hỏi lại xem bạn có chắc chắn muốn khoá file urls.xml không, gõ Y và Enter để xác nhận.
Hoặc đơn giản hơn bạn có thể bạn click phải chuột, chọn properties chọn security và loại bỏ toàn bộ quyên truy nhập NTFS
Sau khi thực hiện các bước trên, mở lại Yahoo! Messenger sẽ thấy quảng cáo biến mất.
Đối với Yahoo Messenger 8
- Đóng cửa sổ Yahoo Messenger.
- Vào Start chọn Run (Nút Windows+R), gõ regedit và nhấn Enter.
- Vào khóa HKEY_CURRENT_USER\Software\ Yahoo\pager\YUrl và thay đổi các giá trị sau thành dấu hoa thị (*):
Nếu những khóa trên không có trong đường dẫn đó, bạn chỉ cần tạo những khóa đó và đặt giá trị của nó là *. Cách tạo: Kích chuột phải vào nền trắng, chọn New -> String Value.
- Đóng cửa sổ Registry Editor và mở Windows Explorer.
- Tìm tới đường dẫn C:\Program Files\Yahoo!\Messenger\Cache\
- Mở file urls.xml
- Xóa sạch nội dung của file urls.xml
- Lưu lại file đã xóa trắng
- Thay đổi thuộc tính của file urls.xml thành Read-Only bằng cách kích chuột phải vào nó và chọn Properties -> Read-only.
Chú ý: Cách trên đây chỉ áp dụng với Yahoo Messenger chạy trên Windows XP. Đối với Windows Vista thì đường dẫn thư mục Cache đã được chuyển vào C:\Users\Tên đăng nhập\AppData\Local\VirtualStore\Program Files\Yahoo!\Messenger\Cache. Trong đó "Tên đăng nhập" là tên User mà người dùng đang sử dụng.
( Ngoài ra còn cách nữa là sử dụng 1 phần mềm miễn phí (freeware) nhỏ để sửa lỗi (patch) cái file yahoo, mình sẽ nói cách này trong bài sau! )
Đối với Yahoo Messenger 9
Yahoo! Messenger 9 lấy quảng cáo từ từ tệp tin cache\urls.xml nằm trong thư mục cài đặt. Vì thế muốn vô hiệu hoá các đoạn quảng cáo bạn chỉ cần xoá trắng file này và đặt thuộc tính sao cho chương trình không thể thay đổi được nội dung của nó. Cụ thể, các bước thực hiện như sau:
Bước 1: Tắt hẳn chương trình bằng cách nhắp phải vào biểu tượng của YM trên thanh Task Bar và chọn Exit.
Bước 2: Giả sử thư mục cài đặt của Yahoo Messenger 9 nằm trong ổ đĩa C. Hãy vào C:\Program Files\Yahoo!\Messenger\cache, nhắp chuột phải vào tệp tin file urls.xml chọn Open With, chọn Notepad và sau đó xoá trắng toàn bộ nội dung tệp tin này và đóng lại.
Bước 3: Khoá file urls.xml đã được xoá nội dung. Để làm điều này ổ C cần phải ở định dạng NTFS. Để biết ổ C có ở dạng NTFS hay không bạn hãy nhắp chuột phải vào biểu tượng ổ C trong My Computer và chọn Properties. Ở dòng File System nếu để là NTFS thì có nghĩa ổ C đã ở dạng NTFS. Nếu để là FAT32 thì bạn cần phải thực hiện tiếp bước sau đây.
Bấm tổ hợp phím Windows + R hoặc vào Start chọn Run để mở cửa sổ Command Line. Trong cửa sổ này bạn nhập lệnh convert C: /fs:ntfs để chuyển định dạng ổ C sang NTFS.
Di chuyển vào thư mục cache bằng dòng lệnh cd C:\Program Files\Yahoo!\Messenger\cache, sau đó nhập lệnh cacls urls.xml /D Everyone để khoá tệp tin urls.xml. Chương trình sẽ hỏi lại xem bạn có chắc chắn muốn khoá file urls.xml không, gõ Y và Enter để xác nhận.
Hoặc đơn giản hơn bạn có thể bạn click phải chuột, chọn properties chọn security và loại bỏ toàn bộ quyên truy nhập NTFS
Sau khi thực hiện các bước trên, mở lại Yahoo! Messenger sẽ thấy quảng cáo biến mất.
Đối với Yahoo Messenger 8
- Đóng cửa sổ Yahoo Messenger.
- Vào Start chọn Run (Nút Windows+R), gõ regedit và nhấn Enter.
- Vào khóa HKEY_CURRENT_USER\Software\ Yahoo\pager\YUrl và thay đổi các giá trị sau thành dấu hoa thị (*):
Quote:Messenger Ad
Webcam Upload Ad
Webcam Viewer Ad
Webcam Viewer Ad Big
Webcam Viewer Ad Medium
Change Room Banner
Conf Adurl
Chat Adurl
Nếu những khóa trên không có trong đường dẫn đó, bạn chỉ cần tạo những khóa đó và đặt giá trị của nó là *. Cách tạo: Kích chuột phải vào nền trắng, chọn New -> String Value.
- Đóng cửa sổ Registry Editor và mở Windows Explorer.
- Tìm tới đường dẫn C:\Program Files\Yahoo!\Messenger\Cache\
- Mở file urls.xml
- Xóa sạch nội dung của file urls.xml
- Lưu lại file đã xóa trắng
- Thay đổi thuộc tính của file urls.xml thành Read-Only bằng cách kích chuột phải vào nó và chọn Properties -> Read-only.
Chú ý: Cách trên đây chỉ áp dụng với Yahoo Messenger chạy trên Windows XP. Đối với Windows Vista thì đường dẫn thư mục Cache đã được chuyển vào C:\Users\Tên đăng nhập\AppData\Local\VirtualStore\Program Files\Yahoo!\Messenger\Cache. Trong đó "Tên đăng nhập" là tên User mà người dùng đang sử dụng.
Theo Thông tin Công nghệ
( Ngoài ra còn cách nữa là sử dụng 1 phần mềm miễn phí (freeware) nhỏ để sửa lỗi (patch) cái file yahoo, mình sẽ nói cách này trong bài sau! )
07:07 GMT+7
Posted by ngotunghp . Folder: Ebooks TutorialsStopping Unneeded Startup Services
Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.
Caution:
Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP's operations, so make sure you understand what the service is before you disable it.
To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.
You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.
Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.
I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.
Notice the Startup Type. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a "dependency" relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.
However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column.
Here's a quick look at common services you may want to live without:
Automatic Updates: This service enables Windows XP to check the Web automatically for updates. If you don't want to use Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.
Computer Browser: If your computer is not on a network, you don't need this service. If you are on a network, leave it alone.
DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).
DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.
Error Reporting and Event Log: You don't have to use these services but they can be very helpful, so I would leave them configured as automatic.
Fax: If you don't use your computer for fax services, you can disable this one.
Help and Support: If you never use the Windows XP Help and Support Center (found on the Start menu), you can disable this service.
IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.
Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.
Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.
Infrared Monitor: If you do not use infrared devices, you can disable this service.
Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.
Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.
Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.
System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.
Themes: If you do not use themes, you can disable this service.
Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.
Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.
You may also have a number of other automatic services, depending on software and other configurations on your computer. So it's a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears
Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don't disable a service unless you are sure you will never use it. However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time.
However, before you change a service to manual, look at the Dependencies tab. This tab shows you which other services depend upon the service you are considering changing.
Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.
The Indexing service and the System Restore service take up a lot of disk space and system resources across the board. You can live without the Indexing service but I suggest that you keep using System Restore. It works great when you are in a bind and this is one case where the loss of speed may not be worth the ramifications of not using System Restore.
More Speedup Tips and Tricks for Windows XP Startup:
Manual IP Addressing on Small Office/Home Networks:
Windows XP is configured to help you take care of networking. It uses the TCP/IP protocol for networking in workgroups, or what you might call small office or home networks that do not use a dedicated server.
The problem is that automatic IP addressing can be slow. When your computer boots, it has to query the network to see what IP addresses are already in use and then assign itself one. If you want to speed up the boot time a bit, consider manually assigning IP addresses to all computers on the network. This way, the network computers do not have to worry about locating an automatic IP address. Because one is manually configured, the operating system doesn't have to spend time solving this problem.
This isn't a networking book, however, so I won't delve into the implications of using a manual IP address, but if you are using a computer that functions as a host computer to the Internet (using Internet Connection Sharing [ICS]), you can get into connectivity problems if you change the configuration of the IP address. However, you can still work around this problem by starting with the ICS host computer.
Select Start/Connect To/Show All Connections. Right-click your network adapter card and click Properties. On the General tab, select TCP/IP in the list of services and click the Properties button.
In the TCP/IP properties, you can see if you use an automatic or manual IP address. In the example, I have configured a manual IP address of 90.0.0.1 and a default subnet mask. The other computers on my office network each use a different IP address in the same class, such as 90.0.0.2, 90.0.0.3, 90.0.0.4, and so on. This way, each computer has a permanent IP address, which helps increase boot time. Note that if you change the IP addresses of your computers, they must all use the same subnet mask. A default subject mask of 255.255.255.0 will keep you in good shape.
Make sure you understand the implications of changing IP addresses on your network. If you have no networking experience at all, you may be wiser to leave the automatic IP addressing as is and try to gain some speed using the additional suggestions in this chapter.
Disabling Recent Documents History:
Windows XP includes a feature that keeps track of all recent documents you have opened or used. The idea is that you can select Start/Recent Documents History and quickly reopen any document you have recently used. I use many documents each day and never use the feature myself. In my opinion, I can keep up with what I want to use without Windows XP doing it for me.
The bad thing about Recent Documents History is that Windows XP has to calculate what should be put there each time you boot Windows, which can slow things down. So, if you never use the Recent Documents History, it's a good idea to disable it. Here's how:
1. Open the Registry Editor (select Start/Run, type regedit, and click OK).
2. Navigate to HKEY_CURRENT_USER\Software\Mcft\Windows\ CurrentVersion\Policies\Explorer.
3. Create a NoRecentDocsHistory D_WORD key. Double-click the value to open it once it is created.
4. Set the Data Value to 1 to enable the restriction.
5. Click OK and close the Registry Editor. You'll need to restart the computer for the change to take effect.
Disabling the Boot Logo:
You can remove the boot logo that appears when you start Windows XP. This little tweak probably shaves only a few seconds off your boot time but seconds count if you are serious about trying to get Windows XP up and running as quickly as possible. The only negative is that if you remove the boot logo, you will also not see any boot messages, such as check disk. (But if you are not having problems with your computer, this isn't such a big deal.)
To remove the boot logo, follow these steps:
1. Select Start/Run, type msconfig, and click OK.
2. In the System Configuration Utility, click the BOOT.INI tab.
3. On the BOOT.INI tab, click the NOGUIBOOT check box option. Click OK.
Removing Unwanted Fonts:
One trick that increases your boot time a bit is to lose any fonts in the Fonts folder in Control Panel that you never use. The more fonts you have, the more processing Windows XP has to do to prep all of those fonts for use. You must be a bit careful here to not remove fonts that you might want, but there is a good chance that you can live without many of them. For instance, you may have foreign language fonts and other symbol fonts (such as Wingdings) that you never use.
To delete unneeded fonts, follow these steps:
1. Open the Fonts folder in Control Panel.
2. Select Edit/Select All and then Edit/Copy.
3. Create a new folder on your desktop, open it, and select Edit/Paste.
4. In this new folder, delete any of the fonts you do not want.
5. Return to the Fonts folder in Control Panel. Right-click the selected fonts and click Delete.
6. Go back to your new desktop folder and click Edit/Select All.
7. Return to your Fonts folder and click Edit/Paste. You now have only the desired fonts in the Fonts folder.
You can directly delete fonts from the Fonts folder without creating the secondary folder. However, I recommend the preceding steps to help ensure that you do not make a mistake in the deletion process.
Stopping Remote Assistance and Remote Desktop Sharing:
In Windows XP Professional, you have two remote networking features called Remote Assistance and Remote Desktop Sharing. These remote networking features are very helpful in a variety of situations but if you don't use them, it is good idea to disable them to save boot time. You can always enable them later if you want to use them.
Note:
If you are interested in using Remote Desktop or Remote Assistance, see my book Windows XP for Power Users: Power Pack published by John Wiley & Sons.
1. Open the Start menu, right-click My Computer, and choose Properties.
2. Click the Remote Tab.
3. Clear both check boxes to disable Remote Assistance and Remote Desktop.
Speeding Up the Dual-Boot Timeout:
If you dual-boot your computer with Windows XP and another operating system, you see an operating system selection menu on startup. If you typically boot into Windows XP and not the other operating system, you can speed up the dual-boot timeout value so that you do not wait so long for the boot process to select your default operating system and continue with the boot process. The default timeout value is 30 seconds but you can change this setting to 10. This gives you enough time to select the alternate operating system if you want but also speeds up the boot process. You can skip this section if you do not use a dual-boot configuration.
Follow these steps:
1. Locate the boot.ini file on your computer. It is a hidden file by default; mine is located in C:\boot.ini.
2. Open the file with Notepad (which is what opens it by default).
3. Change the Timeout value to 10.
4. Select File/Save and close Notepad.
Speeding Up Your PPPoE Connection:
If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section.
1. Select Start/Connect to/Show All Connections.
2. Open the TCP/IP properties for your LAN network interface card.
3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network.
Reducing the Wait Time:
When you start to shut down Windows XP, it has to quit, or "kill," any live applications or processes that are currently running. So close all applications first. However, some applications and processes are always running in the background. You can reduce the amount of time that Windows XP waits for those applications and processes to close before Windows XP kills them. Edit three different Registry settings to change this:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop. Select WaitToKillAppTimeout and set the value to 1000.
3. Select the HungAppTimeout value and set it to 1000 as well.
4. Navigate to HKEY_USERS\.DEFAULT\Control Panel\Desktop. Set the WaitToKillAppTimeout and set the value to 1000. Select the HungAppTimeout \newline value and set it to 1000 as well.
5. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l. Select the WaitToKillServiceTimeout value and set it to 1000.
6. Close the Registry Editor.
Automatically Killing Tasks on Shutdown:
You know the drill. You start to shut down the computer, you wait a few moments, and then you see a dialog box asking if you want to kill an application or service that is running. Instead of prompting you, you can make Windows XP take care of the kill task automatically. Here's how:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop.
3. Highlight the value AutoEndTasks and change the value to 1.
4. Close the Registry Editor.
After you completed these windows XP tricks, hopefully your computer will run too faster then ever before. All this will complete without any error and problem. But be carefully with registry editor and make a registry backup and restore point.
07:05 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
Here some free tips and tricks for Symbian mobile phones. With these secrets you can boost up your mobile phone.
Firstly have some extra ordinary Tricks:
How to reset The Operator Logo?
1) Go to the following dir :
C:\System\Apps\Phone\Oplogo
2) Delete any file in this directory
3) Restart the phone
How to copy & paste text:
Press and hold the pencil key and select your text using the scroll key.
Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'
Retrieve lost MMC password:
1. Open file explorer. (SeleQ, FExplore, AppMan)
2. Search for 'MMCSTORE'
3. When you find it, send it to your PC
4. On PC, open the file with Notepad, or any word processor
5. there goes your password!
Repairing A Corruptted MMC:
Physically, memory cards are quite fragile pieces of high technology, susceptible to damage from various silly things like excessive heat, condensation, strong magnetic fields, physical damage from rough handling and/or bending! (similar to most electronic devices then..)
Given the natue of mobile memory card products, they are constantly being taken in and out of some form of interface with a mobile phone, a camera, a laptop, or desktop PC, or a separate memory card reader. The number of different devices they have to be able to interact with is in the thousands.
It is not too surprisingly, then that sometimes the state of the file system on the memory card can get damaged.
This may happen for a number of different reasons, including:
* removing the card from a device whilst an application is trying to read/write to it.. (Just be patient...)
* battery drain on a device whilst in use meaning an insufficent voltage failure whilst writing to the card.
* a poor implementation of the MMC standard on the device using the card
* poor connectivity software drivers on the device or the Windows PC/Mac
* physical damage like card or device being dropped, bent, getting wet etc...
As often as not, the problem is not terminal for your memory card, but just a software issue ( or in physical terms, it could be called "a temporary disalignment of the all the bits and bytes on the card").
The fix for this problem is the same as for any other file storage device (like a floppy or hard drive) with corrupt or invalid file system, namely; re-format the file system.
Re-Formatting your MMC Card:
It is possible that your mobile will offer you the option of formatting the memory card if it is found to be invalid. (However, the likes of Nokia nGage, Nokia 6600, and Siemens Sx1 often just prefer to reject the media as corrupted).
In that case, to format the card, you will need access to one or more of the following:
* A Windows PC or Mac.
* A separate multi-format memory card reader (verify that it is compatible with the MultiMediaCard -MMC- standard).
* (This can come in USB or PCMCIA flavours. If USB, try and ensutre it is a USB2 device.
* Alternatively, many of the newest laptop and desktop PCs now come with integrated Multi-format memory card readers.
* If you are using a separate memory card reader, then connect it up to your PC, and let windows recgnize the device through plug-and-play.
Now you can insert your MobyMemory card into the appropriate slot in the memory card reader. (Please note that because the MMC card is pretty much symmetrical it is very easy to insert it upside-down in the slot).
Open up [Windows Explorer] (or the equivalent for MAC users..sorry not well-versed in OS X).
There should be at least one icon visible for a [Removable Drive] in the list of available drives. (in fact, there is often a list of about 5 or 6 Removable drives, one for each of the different Memory card formats that your reader is compatible with).
Find the drive that is mapped to the MMC card by clicking on each in turn until it confirms there is a drive present. (Sometimes it is easiest to do this by trying a fully-functional MMC card in the MMC slot first so you can confirm which drive letter it is.)
(NB. It will always be labelled as a [Removable Drive], don't mistake it for one of your PC hard drives like [C:] drive, as that could be catastrophic later on!)
At this stage it may give an error message saying that the drive is unreadable.
By right-clicking on the drive letter, it will provide the option of formatting the drive.
Select format the drive, and the [Format Drive] dialog will appear (Double-check again to make sure it not your [C:] drive!).
There is only one setting to focus on in this page, and that is to ensure that the FileSystem selected for formatting is the [FAT] option (not FAT32, or NTFS or any other option)
(Note: All mobile phones, to my knowledge, and most cameras (etc..) use the FAT file system (or at least are compatible with it) on their memory card media.)
Now click on Format Now ( ensure [Quick Format] is not selected as this will not actually restore the file system space byte by byte, but only resets the header information so the drive thinks its empty again. This may not be enought to solve your corruption problem.)
The PC will now - hopefully!- chug away happily until it has restored the memory card space back to its original configuration (of course, any information on there is long gone by now!).
If you recieve an error message back from the [Format Now] request, then your problem may be more permanent, and not just a software issue. In this case, it may still respond to a format request in a different memory card reader or device.
If you believe it to be a failure of manufacture, then the warranty on the card offers the prospect of a replacement card, subject to a confirmation of the fault upon return of the goods.
Increase Your MMC Space
Your files in MMC are stored in multiple (disk) blocks.
So if you format using 16K block, the space used will be 16K eventhough your file is just 1K.
If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted as most installed program files are usually less than 2K.
You will need a card reader to do this:-
1. Connect card reader and copy all your files in the MMC to computer disk. (Make sure you set the show all/hidden/os files to "on")
2. Do a format of the MMC using command line "format" and use the /A=size option.
Alternative, you can use the Disk Management in Adminstrative Tools to format. Make sure you select FAT. For 256MB MMC, smallest block you can use is 4K, 128MB is 2K, 64Mb is 1K and 32MB is 512B.
(Note: You cannot use the phone "format MMC" to do this as the format just clear the allocation table and does not change the block size)
3. Copy back all files to MMC.
Now you will find that you will have more space. 256mb MMC got back 30+ mbs
Speed Up Your Phone:
First go to your To-do List (default app of your Phone)
- Make a note and input as follows
Subject: Speed
Due Date: 01-29-2005(mm-dd-yy)
Priority: set to High
then press Done
- Make a second Note and input as follows
Subject: Qoukie
Due Date: 01-29-2005(mm-dd-yy)
Priority: set to Low
then press Done
- Do not exit yet, Press the Option of your Subject note w/c is Speed and Mark as done
- then Press the Option of your Subject note w/c is Qoukie and Mark as done
- Now, reboot your mobile.
Handy Tips:
- At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9
- A shortcut on the left menukey in standby-mode will take more time to open than a shortcut on the right menukey. Reason: The left key is also used for the keylock so it shortly waits for pressing the * button.
- While writing text press and hold "#" to switch between Alpha mode and Number mode. You can also press a key long to insert its number.
- In standby-mode, press and hold 0 to launch your wap home page.
- If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's dark without having to unlock the keypad.
- To keep the backlight on, run Torch (freeware), press and hold the Menu button and go somewhere else on the phone.
- To check your current firmware version simply type *#0000# in standby screen.
- To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen.
- To check your Bluetooth device address type *#2820# in standby screen.
- Start up in Safe Mode (no 'auto start' apps will be running): Hold down the pencil key when you turn on the phone and hold it on until you have to enter your PIN code.
- Format the phone memory by typing *#7370# in standby screen.
- In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
Edit/Delete Message
Now more questions and queries about Symbian OS phones:
Tip 1 : Do u know how to use the edit button (abc or pencil button)?
Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages
Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous
I heard the code *#7780# works too, pretty much the same i tink.
for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*>, and the buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. tis method ONLY works on 6600, and need not enter the sec code. BUT sec code wun be reset to default 12345.
Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.
Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!
Tip 4a: Set the screen saver to a short time out period to prolong battery life.
Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.
Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards
Tip 6: Type *#0000# to view which firmware version you are running
Tip 7: If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.
Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.
Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.
Tip 10: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels
Tip 11: Check if the recepients phone is on
Delivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)
Tip 12: BlueJacking First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.
Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)
1 - turn image anticlockwise
3 - turn image clockwise
* - toggle on/off of full screen
5 - zoom in
0 - zoom out
Tip 14: u can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!
Tip 15: Formats of images supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF
Quest & Answer:
How to copy & paste text in your Nokia 3650: Press and hold the pencil key and select your text using the scroll key.
Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.
If a program hangs and you can't shut it down, select the application in the
application switching window and press 'C' to kill it. It's also a faster way to exit programs.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off:
Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off.
(This also effects the sound of Java games and apps).
To change background image go to: Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image".
The best size for background images is 174x132 pixels.
Only got blue, green and purple in your 3650 colour palette?
This free app adds 3 more colours: Palette Extender.
Display an image when someone's calling: Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact:
Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once: Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete. Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send My
Caller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader.
E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder: Menu > Extra's > Recorder > Options > Record sound clip.
Note: short beeps are audible during call registration.
But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.
While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input).
Press and hold "#" to switch between Alpha mode and Number mode.
Keyboard shortcuts for zooming and rotating images in Images: 1 = zoom in, 0 = zoom out, press and hold to return to the normal view.
2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.
In standby mode, press and hold the right soft key to activate voice dialling.
To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:
Options > Add voice tag.
You can customize both soft keys located below the screen (in standby mode): Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".
In standby mode. press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location.
123
456
789
In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
If you have your keylock activated just press the on/off button to turn on your backlight
to look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws up
the whole 3650 system. It was never intended to work on the 3650, only on the 7650.
Why assigning Video Recorder in the right or left soft key does not work?
(Sound Recorder is launched instead of Video Recorder)
It's a bug with firmware version 2.50.
How to check your firmware version: A "Firmware" is the phone's operating system stored in internal Flash memory of the device (disk Z.
Manufacturers release new firmware versions containing bug fixes, improvements and - sometimes - offering new functions.
Firmware upgrade can only be made in authorized Nokia service centre (point).
To check your current firmware version simply type *#0000# on main Phone screen.
Start up in Safe Mode so no 'auto start' apps will be running: To make sure that no memory-resident programs start when you reboot your phone,
hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.
(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick will
almost always let you boot up the phone so you can remove the latest installed app which might have caused the
problem or if your phone is "unrepairable" you can still back up your important data before you do a format.)
How to totally format your Nokia 3650 and remove all installed applications, user files and restore all settings to default like it's new out of the box? (OEM apps won't be deleted like Camera and RealOne Player). A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.
Note: It is very important to format your MMC before you format your phone!
Then format your phone by typing *#7370# on main Phone screen.
Phone will ask: "Restore all original phone settings? Phone will restart." Press 'Yes' and enter your Lock code (default is 12345).
Tip: Formatting takes several minutes so you'd better connect your Nokia 3650
to a charger to ensure that your battery doesn't get empty in the middle of formatting.
Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.
E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,
memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.
To reset your wallet, should you forget your code:
Type in:
*#7370925538#
this will reset the wallet code, the wallet contents will be deleted.
How to free more RAM on your phone
Method 1: Flight mode: Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!
Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case.
But i've also heard several reports of people who have both apps running without any problems.
Method 2: Smart Launcher trick:
Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.
Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don't hold).
The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).
The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even when
the phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So when
you press the Menu button, you go directly to the Menu without any other phone tasks running in the background so
you trick the phone and you have more free RAM!
Note: when you unplug the charger, the phone will switch off.
Method 3: It frees a little about 100~200 KB but I guess it's useful sometime. Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"
So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in realplayer paradis.
Firstly have some extra ordinary Tricks:
How to reset The Operator Logo?
1) Go to the following dir :
C:\System\Apps\Phone\Oplogo
2) Delete any file in this directory
3) Restart the phone
How to copy & paste text:
Press and hold the pencil key and select your text using the scroll key.
Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'
Retrieve lost MMC password:
1. Open file explorer. (SeleQ, FExplore, AppMan)
2. Search for 'MMCSTORE'
3. When you find it, send it to your PC
4. On PC, open the file with Notepad, or any word processor
5. there goes your password!
Repairing A Corruptted MMC:
Physically, memory cards are quite fragile pieces of high technology, susceptible to damage from various silly things like excessive heat, condensation, strong magnetic fields, physical damage from rough handling and/or bending! (similar to most electronic devices then..)
Given the natue of mobile memory card products, they are constantly being taken in and out of some form of interface with a mobile phone, a camera, a laptop, or desktop PC, or a separate memory card reader. The number of different devices they have to be able to interact with is in the thousands.
It is not too surprisingly, then that sometimes the state of the file system on the memory card can get damaged.
This may happen for a number of different reasons, including:
* removing the card from a device whilst an application is trying to read/write to it.. (Just be patient...)
* battery drain on a device whilst in use meaning an insufficent voltage failure whilst writing to the card.
* a poor implementation of the MMC standard on the device using the card
* poor connectivity software drivers on the device or the Windows PC/Mac
* physical damage like card or device being dropped, bent, getting wet etc...
As often as not, the problem is not terminal for your memory card, but just a software issue ( or in physical terms, it could be called "a temporary disalignment of the all the bits and bytes on the card").
The fix for this problem is the same as for any other file storage device (like a floppy or hard drive) with corrupt or invalid file system, namely; re-format the file system.
Re-Formatting your MMC Card:
It is possible that your mobile will offer you the option of formatting the memory card if it is found to be invalid. (However, the likes of Nokia nGage, Nokia 6600, and Siemens Sx1 often just prefer to reject the media as corrupted).
In that case, to format the card, you will need access to one or more of the following:
* A Windows PC or Mac.
* A separate multi-format memory card reader (verify that it is compatible with the MultiMediaCard -MMC- standard).
* (This can come in USB or PCMCIA flavours. If USB, try and ensutre it is a USB2 device.
* Alternatively, many of the newest laptop and desktop PCs now come with integrated Multi-format memory card readers.
* If you are using a separate memory card reader, then connect it up to your PC, and let windows recgnize the device through plug-and-play.
Now you can insert your MobyMemory card into the appropriate slot in the memory card reader. (Please note that because the MMC card is pretty much symmetrical it is very easy to insert it upside-down in the slot).
Open up [Windows Explorer] (or the equivalent for MAC users..sorry not well-versed in OS X).
There should be at least one icon visible for a [Removable Drive] in the list of available drives. (in fact, there is often a list of about 5 or 6 Removable drives, one for each of the different Memory card formats that your reader is compatible with).
Find the drive that is mapped to the MMC card by clicking on each in turn until it confirms there is a drive present. (Sometimes it is easiest to do this by trying a fully-functional MMC card in the MMC slot first so you can confirm which drive letter it is.)
(NB. It will always be labelled as a [Removable Drive], don't mistake it for one of your PC hard drives like [C:] drive, as that could be catastrophic later on!)
At this stage it may give an error message saying that the drive is unreadable.
By right-clicking on the drive letter, it will provide the option of formatting the drive.
Select format the drive, and the [Format Drive] dialog will appear (Double-check again to make sure it not your [C:] drive!).
There is only one setting to focus on in this page, and that is to ensure that the FileSystem selected for formatting is the [FAT] option (not FAT32, or NTFS or any other option)
(Note: All mobile phones, to my knowledge, and most cameras (etc..) use the FAT file system (or at least are compatible with it) on their memory card media.)
Now click on Format Now ( ensure [Quick Format] is not selected as this will not actually restore the file system space byte by byte, but only resets the header information so the drive thinks its empty again. This may not be enought to solve your corruption problem.)
The PC will now - hopefully!- chug away happily until it has restored the memory card space back to its original configuration (of course, any information on there is long gone by now!).
If you recieve an error message back from the [Format Now] request, then your problem may be more permanent, and not just a software issue. In this case, it may still respond to a format request in a different memory card reader or device.
If you believe it to be a failure of manufacture, then the warranty on the card offers the prospect of a replacement card, subject to a confirmation of the fault upon return of the goods.
Increase Your MMC Space
Your files in MMC are stored in multiple (disk) blocks.
So if you format using 16K block, the space used will be 16K eventhough your file is just 1K.
If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted as most installed program files are usually less than 2K.
You will need a card reader to do this:-
1. Connect card reader and copy all your files in the MMC to computer disk. (Make sure you set the show all/hidden/os files to "on")
2. Do a format of the MMC using command line "format" and use the /A=size option.
Alternative, you can use the Disk Management in Adminstrative Tools to format. Make sure you select FAT. For 256MB MMC, smallest block you can use is 4K, 128MB is 2K, 64Mb is 1K and 32MB is 512B.
(Note: You cannot use the phone "format MMC" to do this as the format just clear the allocation table and does not change the block size)
3. Copy back all files to MMC.
Now you will find that you will have more space. 256mb MMC got back 30+ mbs
Speed Up Your Phone:
First go to your To-do List (default app of your Phone)
- Make a note and input as follows
Subject: Speed
Due Date: 01-29-2005(mm-dd-yy)
Priority: set to High
then press Done
- Make a second Note and input as follows
Subject: Qoukie
Due Date: 01-29-2005(mm-dd-yy)
Priority: set to Low
then press Done
- Do not exit yet, Press the Option of your Subject note w/c is Speed and Mark as done
- then Press the Option of your Subject note w/c is Qoukie and Mark as done
- Now, reboot your mobile.
Handy Tips:
- At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9
- A shortcut on the left menukey in standby-mode will take more time to open than a shortcut on the right menukey. Reason: The left key is also used for the keylock so it shortly waits for pressing the * button.
- While writing text press and hold "#" to switch between Alpha mode and Number mode. You can also press a key long to insert its number.
- In standby-mode, press and hold 0 to launch your wap home page.
- If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's dark without having to unlock the keypad.
- To keep the backlight on, run Torch (freeware), press and hold the Menu button and go somewhere else on the phone.
- To check your current firmware version simply type *#0000# in standby screen.
- To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen.
- To check your Bluetooth device address type *#2820# in standby screen.
- Start up in Safe Mode (no 'auto start' apps will be running): Hold down the pencil key when you turn on the phone and hold it on until you have to enter your PIN code.
- Format the phone memory by typing *#7370# in standby screen.
- In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
Edit/Delete Message
Now more questions and queries about Symbian OS phones:
Tip 1 : Do u know how to use the edit button (abc or pencil button)?
Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages
Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous
I heard the code *#7780# works too, pretty much the same i tink.
for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*>, and the buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. tis method ONLY works on 6600, and need not enter the sec code. BUT sec code wun be reset to default 12345.
Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.
Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!
Tip 4a: Set the screen saver to a short time out period to prolong battery life.
Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.
Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards
Tip 6: Type *#0000# to view which firmware version you are running
Tip 7: If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.
Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.
Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.
Tip 10: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels
Tip 11: Check if the recepients phone is on
Delivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)
Tip 12: BlueJacking First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.
Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)
1 - turn image anticlockwise
3 - turn image clockwise
* - toggle on/off of full screen
5 - zoom in
0 - zoom out
Tip 14: u can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!
Tip 15: Formats of images supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF
Quest & Answer:
How to copy & paste text in your Nokia 3650: Press and hold the pencil key and select your text using the scroll key.
Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.
If a program hangs and you can't shut it down, select the application in the
application switching window and press 'C' to kill it. It's also a faster way to exit programs.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off:
Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off.
(This also effects the sound of Java games and apps).
To change background image go to: Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image".
The best size for background images is 174x132 pixels.
Only got blue, green and purple in your 3650 colour palette?
This free app adds 3 more colours: Palette Extender.
Display an image when someone's calling: Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact:
Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once: Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete. Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send My
Caller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader.
E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder: Menu > Extra's > Recorder > Options > Record sound clip.
Note: short beeps are audible during call registration.
But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.
While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input).
Press and hold "#" to switch between Alpha mode and Number mode.
Keyboard shortcuts for zooming and rotating images in Images: 1 = zoom in, 0 = zoom out, press and hold to return to the normal view.
2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.
In standby mode, press and hold the right soft key to activate voice dialling.
To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:
Options > Add voice tag.
You can customize both soft keys located below the screen (in standby mode): Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".
In standby mode. press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location.
123
456
789
In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
If you have your keylock activated just press the on/off button to turn on your backlight
to look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws up
the whole 3650 system. It was never intended to work on the 3650, only on the 7650.
Why assigning Video Recorder in the right or left soft key does not work?
(Sound Recorder is launched instead of Video Recorder)
It's a bug with firmware version 2.50.
How to check your firmware version: A "Firmware" is the phone's operating system stored in internal Flash memory of the device (disk Z.
Manufacturers release new firmware versions containing bug fixes, improvements and - sometimes - offering new functions.
Firmware upgrade can only be made in authorized Nokia service centre (point).
To check your current firmware version simply type *#0000# on main Phone screen.
Start up in Safe Mode so no 'auto start' apps will be running: To make sure that no memory-resident programs start when you reboot your phone,
hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.
(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick will
almost always let you boot up the phone so you can remove the latest installed app which might have caused the
problem or if your phone is "unrepairable" you can still back up your important data before you do a format.)
How to totally format your Nokia 3650 and remove all installed applications, user files and restore all settings to default like it's new out of the box? (OEM apps won't be deleted like Camera and RealOne Player). A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.
Note: It is very important to format your MMC before you format your phone!
Then format your phone by typing *#7370# on main Phone screen.
Phone will ask: "Restore all original phone settings? Phone will restart." Press 'Yes' and enter your Lock code (default is 12345).
Tip: Formatting takes several minutes so you'd better connect your Nokia 3650
to a charger to ensure that your battery doesn't get empty in the middle of formatting.
Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.
E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,
memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.
To reset your wallet, should you forget your code:
Type in:
*#7370925538#
this will reset the wallet code, the wallet contents will be deleted.
How to free more RAM on your phone
Method 1: Flight mode: Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!
Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case.
But i've also heard several reports of people who have both apps running without any problems.
Method 2: Smart Launcher trick:
Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.
Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don't hold).
The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).
The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even when
the phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So when
you press the Menu button, you go directly to the Menu without any other phone tasks running in the background so
you trick the phone and you have more free RAM!
Note: when you unplug the charger, the phone will switch off.
Method 3: It frees a little about 100~200 KB but I guess it's useful sometime. Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"
So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in realplayer paradis.
07:04 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
After a long time using your mobile phones or even after a short period, sometimes you may get some problem in its functioning like automatic restart, unable to delete some file, camera not working, virus infected like commwarior, OS works very slow, bluetooth not working, phone hangs or not responding, unable to restart, in that case the first and foremost step is restore your original factory settings. Here I’m telling you how to track back the original factory settings and if the problem still persists than there’s an alternative approach for doing so.
Resetting Phone factory settings by Nokia Secret Codes.
This method is very simple one and you don't have to do much effort. In this process factory settings are restored i.e. phone is switched back to default settings and no application is deleted.
First Method-Normal Reset:
Before you start this first backup your phone books, calender and any other important stuff to your PC or memory card and then simply enter this code
*#7780#
It will ask for “Restore all phone settings-phone will restart….”
Then it will ask for security code, enter your security code whose default value is 12345 and then the phone is reset after restart. After doing all this phone will be restored to the time when you purchased the phone and no application is removed.
Second Method-Hard Reset :
The other method is formatting memory disk. It format the phone memory, everything that has been installed other than the default applications that were present at the time of purchase will be deleted. The phone restored to time to you purchased keeping the original software intact.This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten. Files and applications stored on E: drive are not be affected by these sequences.
To do this just enter the code: -#7370#
Then it asks for security code, enter your security code and by default its value is 12345 and process as done in previous method.
Before starting just take backup of all the necessary data like contacts, calender etc.
Note : Battery should be fully charged or be connected to charger so that it may not run out of power.
If you encounter situation like below on your phone:
1. Blank screen phone and/or unable to reboot.
2. Phone only boot-up to "Nokia" word welcome screen.
3. Install some program but not able to uninstall it after that.
4. Unable to delete any unwanted files on C drive.
Do a Full phone formatting on your as steps below :
1. Make sure you have at least 3/4 charge of battery power left.
2. Backup your all contact list and personal files to your memory card or PC.
3. Switch-off your phone and remove memory card.
4. Press and hold three keys : Green dial key, * Star key, no. 3 key on keypad and then press the power on/off button to switch on the phone. Remember! do not let go the 3 press and hold keys until you see a 'formatting' word screen show.
5. After a few minutes when the Full phone formatting completed, your phone will back to original company system and factory setting. Hope your phone will now work fine.
Resetting Phone factory settings by Nokia Secret Codes.
This method is very simple one and you don't have to do much effort. In this process factory settings are restored i.e. phone is switched back to default settings and no application is deleted.
First Method-Normal Reset:
Before you start this first backup your phone books, calender and any other important stuff to your PC or memory card and then simply enter this code
*#7780#
It will ask for “Restore all phone settings-phone will restart….”
Then it will ask for security code, enter your security code whose default value is 12345 and then the phone is reset after restart. After doing all this phone will be restored to the time when you purchased the phone and no application is removed.
Second Method-Hard Reset :
The other method is formatting memory disk. It format the phone memory, everything that has been installed other than the default applications that were present at the time of purchase will be deleted. The phone restored to time to you purchased keeping the original software intact.This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten. Files and applications stored on E: drive are not be affected by these sequences.
To do this just enter the code: -#7370#
Then it asks for security code, enter your security code and by default its value is 12345 and process as done in previous method.
Before starting just take backup of all the necessary data like contacts, calender etc.
Note : Battery should be fully charged or be connected to charger so that it may not run out of power.
If you encounter situation like below on your phone:
1. Blank screen phone and/or unable to reboot.
2. Phone only boot-up to "Nokia" word welcome screen.
3. Install some program but not able to uninstall it after that.
4. Unable to delete any unwanted files on C drive.
Do a Full phone formatting on your as steps below :
1. Make sure you have at least 3/4 charge of battery power left.
2. Backup your all contact list and personal files to your memory card or PC.
3. Switch-off your phone and remove memory card.
4. Press and hold three keys : Green dial key, * Star key, no. 3 key on keypad and then press the power on/off button to switch on the phone. Remember! do not let go the 3 press and hold keys until you see a 'formatting' word screen show.
5. After a few minutes when the Full phone formatting completed, your phone will back to original company system and factory setting. Hope your phone will now work fine.
07:03 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
Secret codes for Chinese Mobiles:
After a lots of request of users, now I publish the secret codes for most type of china brands mobile phone. Nokia N-Series: N95, N93, N73, N93I, N83, N8800, and more available in Chinese models. They have features like touchscreen, two camera, 2 SIM slot, two battery, two charger, and some of other features. Most Chinese phones have same software and features, but have different in looks. These phone have a range of under 2k-8k (INR). Sony Ericsson phones also avaliable in Chinese models and soon will here.
China Mobile Secret Codes and Pinout:
Default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#0084#call
*******************************************
N95Pda and N95S Pinout
2×5
4:Rx
5:TX
6:GND
---------------------
K1 Moto Pinout
4:Rx
5:Tx
6:Gnd
---------------------
PDA ZT6618
1..8 pin mini Conector
3:Rx
4:TX
5:Gnd
--------------------
Cect 8380
1..8 pin mini Conector
1:Gnd
2:Rx
3:Tx
---------------------
KG-200
4:Gnd
3:Tx
2:Rx
----------------------
N91I
1...12 pin Connector
.
5:Gnd . 12:Tx
6:Tx . 13:Rx
7:Rx .
After a lots of request of users, now I publish the secret codes for most type of china brands mobile phone. Nokia N-Series: N95, N93, N73, N93I, N83, N8800, and more available in Chinese models. They have features like touchscreen, two camera, 2 SIM slot, two battery, two charger, and some of other features. Most Chinese phones have same software and features, but have different in looks. These phone have a range of under 2k-8k (INR). Sony Ericsson phones also avaliable in Chinese models and soon will here.
China Mobile Secret Codes and Pinout:
Default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese
*#77218114#
*#19992006#
*#881188#
#*94267357#
*#0084#call
*******************************************
N95Pda and N95S Pinout
2×5
4:Rx
5:TX
6:GND
---------------------
K1 Moto Pinout
4:Rx
5:Tx
6:Gnd
---------------------
PDA ZT6618
1..8 pin mini Conector
3:Rx
4:TX
5:Gnd
--------------------
Cect 8380
1..8 pin mini Conector
1:Gnd
2:Rx
3:Tx
---------------------
KG-200
4:Gnd
3:Tx
2:Rx
----------------------
N91I
1...12 pin Connector
.
5:Gnd . 12:Tx
6:Tx . 13:Rx
7:Rx .
06:58 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
Want to know what version of Software you have? Also check IMEI number?
Here you have the special secret codes for your mobile phone.
With these secret codes you can, (without any problem), check the IMEI software version, reset to default language or deactivate simlock (only on some models). Some of the codes you see below must by typed without the SIM card in the cellphone and some with the SIM card in the phone. Please be careful! - with some of these codes you may block your cellphone.
SIMLOCK Information:
Hagenuk
IMEI number: * # 0 6 #
Software version: # # 9 1 4 0 * 8 3 # 7 5 * 2 #
Mitsubishi
View IMEI:> * # 06 # View IMEI
Default language English: * # 0044 # English
JDefault language Deutch: * # 0049 # Deutsch
NetMonitor1 activate: hold * enter 4329
NetMonitor2 activate: hold * enter 621342
Enter into M4 Test mode: hold * enter 5472
Show SW version: hold * enter 5806
Show HW version: hold * enter 5807
Show SW and HW version: hold * enter 936505
NS Lock Menu: hold * enter 476989
CP Lock Menu: hold * enter 482896
NS Lock Menu: hold * enter 574243
SP Lock Menu: hold * enter 967678
IMSI Lock Menu: hold * enter 362628
Lock net.level: hold * enter 787090
Lock net.level: hold * enter 787292
Shut Down: hold * enter 3926
Motorola
IMEI number: * # 0 6#
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up
Nokia
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # lub * # 9 9 9 9 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI
Philips
IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Sercurity code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #
Samsung
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset memory (SIMLOCK`a removing!!!): * 2 7 6 7 * 3 8 5 5 #
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #
Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #
Siemens
IMEI number: * # 0 6 #
Software version: put off sim card and enter:: * # 0 6 # (and press LONG KEY)
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power): Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red phone, Menu 5 6
Sony
IMEI number: *#06#
Software version: *#8377466#
Show list of product creator names: (you must save this number in your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2 1
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
Bosch
IMEI number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
Dancall
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
SIMcard serial number: * # 9 9 9 4 #
Information about battery status: * # 9 9 9 0 #
Selftest (only Dancall HP2731): * # 9 9 9 7 #
Show version configuration: * # 9 9 9 8 #
Net Monitor: * # 9 9 9 3 #
Ericsson
IMEI number: * # 0 6 #
Software version: > *
Dafault Language:
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Here you have the special secret codes for your mobile phone.
With these secret codes you can, (without any problem), check the IMEI software version, reset to default language or deactivate simlock (only on some models). Some of the codes you see below must by typed without the SIM card in the cellphone and some with the SIM card in the phone. Please be careful! - with some of these codes you may block your cellphone.
SIMLOCK Information:
Hagenuk
IMEI number: * # 0 6 #
Software version: # # 9 1 4 0 * 8 3 # 7 5 * 2 #
Mitsubishi
View IMEI:> * # 06 # View IMEI
Default language English: * # 0044 # English
JDefault language Deutch: * # 0049 # Deutsch
NetMonitor1 activate: hold * enter 4329
NetMonitor2 activate: hold * enter 621342
Enter into M4 Test mode: hold * enter 5472
Show SW version: hold * enter 5806
Show HW version: hold * enter 5807
Show SW and HW version: hold * enter 936505
NS Lock Menu: hold * enter 476989
CP Lock Menu: hold * enter 482896
NS Lock Menu: hold * enter 574243
SP Lock Menu: hold * enter 967678
IMSI Lock Menu: hold * enter 362628
Lock net.level: hold * enter 787090
Lock net.level: hold * enter 787292
Shut Down: hold * enter 3926
Motorola
IMEI number: * # 0 6#
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up
Nokia
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # lub * # 9 9 9 9 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI
Philips
IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Sercurity code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #
Samsung
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset memory (SIMLOCK`a removing!!!): * 2 7 6 7 * 3 8 5 5 #
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #
Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #
Siemens
IMEI number: * # 0 6 #
Software version: put off sim card and enter:: * # 0 6 # (and press LONG KEY)
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power): Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Red phone, Menu 5 6
Sony
IMEI number: *#06#
Software version: *#8377466#
Show list of product creator names: (you must save this number in your Phone Book with "own phone no." record): + 1 2 0 2 2 2 4 3 1 2 1
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
Bosch
IMEI number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
Dancall
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
SIMcard serial number: * # 9 9 9 4 #
Information about battery status: * # 9 9 9 0 #
Selftest (only Dancall HP2731): * # 9 9 9 7 #
Show version configuration: * # 9 9 9 8 #
Net Monitor: * # 9 9 9 3 #
Ericsson
IMEI number: * # 0 6 #
Software version: > *
Dafault Language:
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
06:56 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
Samsung Secret Codes Part 2
#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
Samsung Secret Codes Part 3
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF
Type *#9998*627837793# Go to the 'my parameters' and there you will find new menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .
Java status code: #*53696# (Samsung X600)
If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call batton and it's unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn't work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)
#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
Samsung Secret Codes Part 3
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF
Type *#9998*627837793# Go to the 'my parameters' and there you will find new menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .
Java status code: #*53696# (Samsung X600)
If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call batton and it's unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn't work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)
06:55 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
IMEI number: *#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name): [] [] [] 0 0 8 [] 1 []
Add phonebook to main menu: [] [] [] 1 0 5 [] 1 []
Add messages to main menu: [] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu): [] [] [] 1 0 8 [] 1 []
Eng Field options (main menu): [] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu): [] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu): [] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu): [] [] [] 1 0 3 [] 1 []
Enable EFR: [] [] [] 1 1 9 [] 1 []
Function : [] [] [] # # # [] 1 []
Change pin: [] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number: [] [] [] 0 0 5 [] 1 []
There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.
You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900
To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name): [] [] [] 0 0 8 [] 1 []
Add phonebook to main menu: [] [] [] 1 0 5 [] 1 []
Add messages to main menu: [] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu): [] [] [] 1 0 8 [] 1 []
Eng Field options (main menu): [] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu): [] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu): [] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu): [] [] [] 1 0 3 [] 1 []
Enable EFR: [] [] [] 1 1 9 [] 1 []
Function : [] [] [] # # # [] 1 []
Change pin: [] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number: [] [] [] 0 0 5 [] 1 []
There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.
You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900
To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)
06:53 GMT+7
Posted by ngotunghp . Folder: Ebooks Tutorials » PDA Mobile Phones
Here I provides to you secret codes for most types of CDMA Mobile Phones.
Hope they'll helps you to solve out your problem to CDMA technology. Most common CDMA phone models available here and rest you got soon.
Nokia:
5185/6185 programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#
Nokia 6185-5170
1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete
Nokia 3585
1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display is empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming. Press the upper right hand soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.
Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
Samsung A500
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete
Qualcomm:
QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
QCP 1960 and 2760
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete
LG:
LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete
LG5350
1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key
TP 2100
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete
TP3000
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete
TP 5250
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete
LG V111(DM110)
[menu]30.
After ask lockcode, enter: 843691.
Ericsson:
Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu
Hyundai:
HGC-120E / -130E programming: #86904**89397#
HGC-600E programming: ##20022002, END and enter SPC: "000000" or may be other SPC typed by user.
Sony:
CM-M1300/3300/Z200 programming: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
Sony CM-M1300
1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service sercurity code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier’s system ID (SID) without the zeros
(Example: if your carrier’s system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete
Motorola:
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)
Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key
Motorola Phones (ALL)
1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again - programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.
SK Teletech:
SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#
Getrun 2000
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
NEOPOINT:
Neopoint 1000
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete
Neopoint 1600
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you for the code)
at the "preferences" screen to access the "Service" menu (Default code is "000000")
5. Scroll to "Programming" - press "Select" - the phone will ask for the "Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone will reset
Audiovox:
Audiovox 9100
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming
Handspring TREO:
1. Open the flip and press the PHONEBOOK button one time to display the dial pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard
5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field
6. Press OK
7. The device will display the network search pop-up and return to the Phonebook display
Hitachi P300:
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
6. At the Save prompt press the OK soft key. The next display will show several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.
Kyosera:
Kyocera 2345 1135
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming
Kyocera 6035
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.
Kyocera 3035
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key (Navigation key is the button located between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the “clear” key (arrow key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.
Kyocera 2255
1. Press the 1 key six times (111111) “Option will be highlighted
2. Press OK
3. Scroll down to “Programming” and press “OK”
4. Enter OTKSL and press the navigation key
5. “Service Options” will appear scroll down to the “Basic NAM1 Info”
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.
QCP 2035
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press ? key
7. Press ? key again to exit - Programming is complete
Sanyo:
Sanyo 4000 4500 4700 5000 6000
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed - press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete
Sanyo 5150 5300 and 6400
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete
Sanyo 6000
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete
Sanyo 4900
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete
Sanyo 6200
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete
Hope they'll helps you to solve out your problem to CDMA technology. Most common CDMA phone models available here and rest you got soon.
Nokia:
5185/6185 programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#
Nokia 6185-5170
1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete
Nokia 3585
1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display is empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming. Press the upper right hand soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.
Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
Samsung A500
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete
Qualcomm:
QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
QCP 1960 and 2760
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete
LG:
LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete
LG5350
1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key
TP 2100
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete
TP3000
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete
TP 5250
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete
LG V111(DM110)
[menu]30.
After ask lockcode, enter: 843691.
Ericsson:
Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu
Hyundai:
HGC-120E / -130E programming: #86904**89397#
HGC-600E programming: ##20022002, END and enter SPC: "000000" or may be other SPC typed by user.
Sony:
CM-M1300/3300/Z200 programming: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
Sony CM-M1300
1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service sercurity code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier’s system ID (SID) without the zeros
(Example: if your carrier’s system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete
Motorola:
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)
Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key
Motorola Phones (ALL)
1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again - programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.
SK Teletech:
SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#
Getrun 2000
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
NEOPOINT:
Neopoint 1000
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete
Neopoint 1600
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you for the code)
at the "preferences" screen to access the "Service" menu (Default code is "000000")
5. Scroll to "Programming" - press "Select" - the phone will ask for the "Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone will reset
Audiovox:
Audiovox 9100
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming
Handspring TREO:
1. Open the flip and press the PHONEBOOK button one time to display the dial pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard
5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field
6. Press OK
7. The device will display the network search pop-up and return to the Phonebook display
Hitachi P300:
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
6. At the Save prompt press the OK soft key. The next display will show several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.
Kyosera:
Kyocera 2345 1135
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming
Kyocera 6035
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.
Kyocera 3035
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key (Navigation key is the button located between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the “clear” key (arrow key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.
Kyocera 2255
1. Press the 1 key six times (111111) “Option will be highlighted
2. Press OK
3. Scroll down to “Programming” and press “OK”
4. Enter OTKSL and press the navigation key
5. “Service Options” will appear scroll down to the “Basic NAM1 Info”
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.
QCP 2035
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press ? key
7. Press ? key again to exit - Programming is complete
Sanyo:
Sanyo 4000 4500 4700 5000 6000
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed - press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete
Sanyo 5150 5300 and 6400
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete
Sanyo 6000
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete
Sanyo 4900
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete
Sanyo 6200
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete